Press Brake vs. CNC Folder: Which One Should I Choose?

13-12-2023

When adding bending capacity to a sheet metal workshop, the question comes up as to whether to purchase a press brake or a CNC folding machine. In reality, a busy sheet metal shop can save time and money by having both machines on-hand. But, the question remains, ‘why should I add a CNC folder to my plant list?’

For those making a product there are applications which favour either process, so it is helpful to review what these machines do differently and which one benefits certain applications.

Press brake vs. CNC folder: What do they do differently?

What does a Press Brake do?

A Press Brake works by using a top tool – or punch – to press the material into a vee on a bottom tool – or die – to form an angle. The majority of Press Brakes working today use the air bending method where the two shoulders of the vee die create three points with the tip of the punch to create the bend.

What does a CNC Folder do?

A CNC Folder (or just 'Folder' for short) on the other hand, clamps the material in the flat position and uses a folding beam to bend the material up in a rotary action to the desired angle.


Is a Press Brake or CNC Folder the More Versatile Machine?

A Press Brake is undeniably the more versatile machine.

If your requirement is to handle a range of bending tasks from thin to thick material, without knowing what might come through the door tomorrow, then a Press Brake is likely to be the best solution. This is because with the correct tooling, heavier plates can be bent on narrower widths within the tonnage capacity of the machine, while a large number of different tools are available for specific tasks such as hemming, over bending and joggling.


What Advantages does a CNC Folder Have over a Press Brake?

1. Handling large or heavy parts

This application is well suited for a CNC Folder. When bending large parts on a Press Brake, it will typically involve two operators to gauge the material and support it during bending. This greatly increases cycle time, manual handling and risk of injury, all of which can be avoided on a CNC Folder with a back gauge table.

In this case, the material is continuously supported and the operator merely has to position the material against the back gauge fingers.

2. Working with thin material

When gauging longer flanges in very thin material on a press brake, the material can drop down under its own weight before meeting the back gauge. While you can often program the machine to use the back gauge finger as a support, it is still quite slow and awkward work.

On the folder however, with the material continuously supported, this issue is completely avoided.

3. Bending small flanges on large parts

An application at which folders excel is when there is a requirement to bend small flanges on large sheets.

With a Press Brake, the majority of the sheet will be out of the front of the machine, probably requiring two operators to handle it. On the folder only the flange to be bent will be out of the front, with the rest of the material resting on the back gauge table, therefore ensuring accuracy and avoiding distortion from the weight of the sheet. 

4. Bending a range of applications without changing tools

While a Press Brake may need tool changes to cope with different material thicknesses and bending angles, a folder will bend all angles and thicknesses – within the capacity of the machine – without any tooling changes.

This is a significant time saver, especially when doing small batch work or interrupting production with an urgent off-cycle part. 

5. Using coated or sensitive material

Folders are also very effective at bending polished, coated or other sensitive materials, as the part remains clamped securely while the folding beam creates the bend, resulting in little or no marking of the material.

Press Brake tooling can significantly mark material resulting in damaged parts or a secondary clean up operation, although operators will try to prevent this using non-marking film.


Press Brake vs CNC Folder at a Glance

  Press brake CNC folder
Bending method Punch presses the material into a vee die (air bending) Material is clamped flat and a folding beam bends it upwards
Material thickness Thin sheet to heavy plate Thin to medium sheet
Large or heavy sheets Often needs two operators to support the part Supported on the back gauge table and handled by one operator
Very thin material Long flanges can sag before reaching the back gauge Fully supported, so no sagging
Tool changes Needed for different thicknesses and angles Not needed within the machine’s capacity
Marking of the material    Possible without non-marking film or tooling Little or no marking
Specialist shapes Wide range of tools for hems, joggles, radii and channels    More limited range of profiles
Best suited to Varied work, thick plate, high volumes of smaller parts Large panels, coated materials, mixed small batches
Operators needed One or two, depending on part size Usually one

Already running Press Brakes? Free up your machines for what they are best at!

In situations where press brakes are tied up producing large parts using two operators, it can make sense to move production of these parts to a CNC Folding Machine where they can be produced by one operator.

This leaves the Press Brake free to work with smaller, complex parts in thicker material and higher batch quantities which they excel at and also leaves an operator free for other tasks.


Press Brakes vs. CNC Folding Machines: The Verdict

It is important to bear in mind that there are jobs that can only be produced on a Press Brake and vice versa; however for a significant number of applications you have a choice.

If your work is varied and includes thicker material, start with a press brake. If you regularly bend large panels, thin sheet or coated materials, a CNC folder will save time and labour.

Many workshops find that adding a folder frees their press brakes for the work they do best. 

Why not visit the Bison Machinery showroom to make a direct comparison? Please get in touch using our contact form or emailing us at sales@bisonmachinery.co.uk. Or simply give us a call to discuss on 01785 336732.

Updated article 2026. This post was previously published in November 2016 and February 2020.


Frequently Asked Questions about Press Brakes and CNC Folders

What’s the difference between a press brake and a folder?

Both machines are used to bend sheet metal, but they achieve the bend in different ways. A press brake forms bends by pressing material between a punch and die, while a folder clamps the sheet and uses a folding beam to create the angle. Press brakes are generally better suited to complex forms and thicker materials, whereas folders excel with large, thin or pre-finished sheets by supporting the material throughout the folding process.

Can a CNC folder bend thick steel?

CNC folders are primarily designed for thin to medium-gauge sheet metal applications. Maximum capacity depends on the machine specification, with many industrial folders capable of handling several millimetres of mild steel. For thicker plate and heavy fabrication work, a press brake is often the preferred solution due to its higher forming force.

Is a CNC folder faster than a press brake?

The answer depends on the application. CNC folders are often more productive when manufacturing large panels, thin-gauge components or small batch runs, as they typically require fewer tool changes and can often be operated by a single person. Press brakes can be more efficient for high-volume production of smaller, repetitive parts where dedicated tooling is already in place.

Do folding machines damage coated or polished sheet metal?

One of the key advantages of a CNC folder is its ability to process delicate materials with minimal surface marking. Because the sheet remains securely clamped while the fold is formed, the risk of scratches or tooling marks is significantly reduced. This makes folding machines particularly well suited to pre-painted steel, stainless steel, aluminium and decorative sheet materials.

Can I bend stainless steel and aluminium on a CNC folder?

Yes. CNC folders are commonly used to bend a wide range of materials, including mild steel, stainless steel and aluminium. As stainless steel requires greater forming force than mild steel, maximum bending capacities will typically be lower than the machine's quoted mild steel specifications. Our team can advise on the most suitable machine for your material type and thickness requirements.

What are the benefits of a CNC Folder over a Press Brake?

CNC folders offer several advantages, particularly when working with large sheet metal components. They reduce handling requirements, minimise the risk of surface damage and often allow a single operator to produce parts efficiently. They are particularly popular in industries such as HVAC, cladding, roofing, architectural metalwork and electrical enclosures where large panels and high-quality surface finishes are essential.

Can a CNC folder create complex bends?

Yes. Modern CNC folding machines can produce a wide variety of bend profiles, including positive and negative bends, boxes, trays, channels and complex multi-bend components. Advanced CNC controls automatically calculate bend sequences, helping to improve accuracy and reduce setup times.

Is a CNC folder easy to program?

Modern CNC folders are designed for straightforward operation. Many systems include graphical programming software that allows operators to create parts directly at the control or import designs from CAD software. Automated bend sequencing and collision detection further simplify programming and reduce production errors.

What industries use CNC folding machines?

CNC folders are widely used across sheet metal fabrication industries, including HVAC manufacturing, building products, electrical enclosures, commercial vehicle bodywork, steel furniture, signage, construction products and architectural metalwork. Their ability to process large sheets quickly and accurately makes them a popular choice for manufacturers looking to improve productivity and part quality.

Subscribe to the Bison Blog